Instructions / Assembly

Fig 1

Fig 4

Fig 2

Fig 5

Fig 3

2. Once your alarm host has been detected by the app the pair LED on the host will go out indicating that it

was found. You will now be given the opportunity to name the alarm host (Fig 4) such as home, work, etc, prior

to saving it. Now input the default host password 123456 and, tap save (Fig 4) to complete the setup. Your

device will now be displayed as the start screen whenever the app is launched (Fig 5)

BROADCAST IN LAN

Please follow the steps below to add your alarm host to the HomeBot app using the Broadcast in LAN method.

1. Insert the female end of the AC adapter into the DC IN port (Fig 1) located at the bottom of the host and

connect the other end into a wall outlet. Then connect one end of the Ethernet cable into the Ethernet port (Fig

1) (also located at the bottom of the alarm host) and the other end into your wireless router. Make sure you use the

cable management grooves (Fig 2) to help keep the cables organized.

NOTE: The Ethernet cable is only required for setup and can be removed once you connect the host to your Wi-Fi

network.