Instructions / Assembly

AP MODE

To add your alarm host to the HomeBot app using the AP Mode method, make sure your new alarm host in pow-

ered on and follow the steps below.

1. Tap on the AP Mode option (Fig 1) to begin the adding process. Turn your alarm host upside down then

“Press and Hold” the pair button (Fig 2) until the pair LED located on the top of the host becomes solid.

2. When the alarm host’s pair LED is solid, go to your Smartphone’s or tablets Wi-Fi settings and connect to the

network labeled “HOME_BOT_AP” (Fig 3). Wait for your device to connect (Fig 4), then return to the app and

press next (Fig 5).

3. Now select the Wi-Fi network that you want to connect the host too (Fig 6), input the Wi-Fi password when

prompted (Fig 7) and press next. This will allow the app to smart conﬁgure the alarm host using your current

wireless network.

Fig 1

Fig 3

Fig 2

Fig 4 Fig 5