Instructions / Assembly

4. Once all LED’s on the alarm hast turn off “Press and Hold” the power button on the host (Fig 8) until the

power LED turns back on. Wait 40-60 seconds for the host to boot up and then press “Next” on the Smartphone

prompt (Fig 9).

5. Select the serial ID associated with your alarm host (Fig 10) and tap on it to proceed. You will now be given

the opportunity to name the alarm host (Fig 11) such as home, work, etc, prior to saving it. Now input the default

host password 123456 and, tap save (Fig 11) to complete the setup. Your device will now be displayed as the

start screen whenever the app is launched (Fig 12).

Fig 6

Fig 8

Fig 7

Fig 9