Instructions / Assembly

47
DID
The Device ID (DID) section provides you with the cameras ID which is used to add the camera to the app, unique
to each device and is not configurable.
FIRMWARE VERSION
The Firmware Version section displays the cameras current firmware version and is not configurable.
CHECK UPGRADE
The Check Upgrade performs a firmware check over the internet and installs it if and when one is available.
CHANGE PASSWORD
The Change Password option allows you to change the cameras default password (123456) which is used to login
and view the camera remotely. This is the same password used when first adding the camera to the app.
CHANGE ADMIN PASSWORD
The Change Admin Password option allows you to change the cameras default admin password (123456) which
is used to access the camera settings and configuration page.
MOTION DETECTION
The Motion Detection option is used to enable or disable motion detection recording. To enable or disable this
feature, simply tap on the option label and select the desired option from the list provided.
EVENT LIST or VIDEO PLAYBACK
The Event List option is to view and playback recorded events that are stored on the Micro SD card inserted into the
back of the camera.
NOTE: For best results, we recommend using a 32GB Kingston class 6 or higher.
LOOP RECORD
The Loop Record option enables and disables the out overwrite feature. Enabling the loop record feature allows
the camera to loop back to begin deleting old files stored on your memeory card to make room for new files.
STORAGE MANAGEMENT
The Storage Management option allows you to view the total/free space available, format (erase) and safely eject
the memory by using the un-mount option.
DID
Firmware Version
Check Upgrade
Change Password
Change Admin Pass
Motion Detection
Event List
Loop Record Storage
Management
Video Rotation
Set Date & Time
WLAN