Reference Guide

Integration instructions for host product manufacturers according to KDB 996369 D03 OEM
Manual v01
2.2 List of applicable FCC rules
FCC Part 15 Subpart C 15.247 & 15.207 & 15.209
2.3 Specific operational use conditions
The module is a module with Bluetooth and WIFI functions.
Operation Frequency: WiFi 2.4G: 802.11b/ g/ n(HT20) 2412-2462MHz
BDR&EDR: 2402-2480MHz
BLE: 2402-2480MHz
Number of Channel: WiFi 2.4G: 11 Channels for 802.11b/ g/ n(HT20)
BDR&EDR: 79 Channels
BLE: 40 Channels
Modulation: WiFi 2.4G: 802.11b CCK; 802.11g/n OFDM
BDR&EDR: GFSK, π/4-DQPSK, 8-DPSK
BLE: GFSK
Type: Ceramic Antenna
Gain: 3 dBi Max.
The module can be used for mobile or portable applications with a maximum 3dBi antenna. The
host manufacturer installing this module into their product must ensure that the final composit
product complies with the FCC requirements by a technical assessment or evaluation to the FCC
rules, including the transmitter operaition. The host manufacturer has to be aware not to provide
information to the end user regarding how to install or remove this RF module in the user's manual
of the end product which integrates this module. The end user manual shall include all required
regulatory information/warning as show in this manual.
2.4 Limited module procedures
Not applicable. The module is a Single module and complies with the requirement of FCC Part
15.212.
2.5 Trace antenna designs
Not applicable. The module has its own antenna, and doesn’t need a host’s printed board
microstrip trace antenna etc.
2.6 RF exposure considerations
The module must be installed in the host equipment such that at least 5mm is maintained between
the antenna and users’ body; and if RF exposure statement or module layout is changed, then the
host product manufacturer required to take responsibility of the module through a change in FCC
ID or new application. The FCC ID of the module cannot be used on the final product. In these
circumstances, the host manufacturer will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
2.7 Antennas
Antenna Specification are as follows:
Type: Ceramic Antenna
Gain: 3 dBi