User's Manual

19 By Firstech, LLC By Firstech, LLC 18
Option Programming for Four Button Remotes for FM or SS Units Installation of AM Antennas
Option Programming with Programming Button for AM Units
Step1:
For Programming menu 1: Press Buttons (I+II) for 2 seconds. For Programming menu 2: Press Buttons (I+IV) for 2 seconds.
The car will chirp once indicating that you are in programming mode.
Step2:
Within a 2 seconds after pressing (I+II) or (I+IV), press Button IV the number of times to go to the option number you want to change.
You have to hear a chirp and see the parking light flash each time when you press Button IV.
Step3 :
Wait a few seconds. You will hear a number of chirps and see a number of parking light flashes corresponding to the option number you want to change.
If the number of chirps or flashes is not what you want, go back to Step 1.
Step4 : Press Button I for the default factory settings and your car will respond by one chirp and one flash. Press Button II for the optional setting and your car
will respond by two chirps and two parking flashes.
ᵉᵉ
If you see an extended flash of the lights, you are going out of programming mode, please go back to Step 1.
ᵉᵉ
If you want to change more options, go back to Step 1.
ᶀᶀ
Resetting any Option Setting to the Factory Setting
Step1: Press Buttons (I+II) simultaneously or Buttons (I+IV) simultaneously for 2 seconds. A one flash of the parking lights confirms step 1.
Step2: Press Button III three times. This is confirmed by a parking light flash each time you press Button III. A few second later, your cars parking lights will
flash three times rapidly. Your car is now set to all of the original factory default settings.
The antennas have been calibrated for horizontal installation at the left-top corner of the windshield. Different installation may adversely affect the
transmitting distance.
CANADIAN MODELS ONLY. THE US MODELS DO NOT HAVE THE BUTTON.
Most of the original programming (
ᴘᴘ
Factory Setting
ᴙᴙ
) from the factory can be changed to alternative programming (
ᴘᴘ
Option Setting
ᴙᴙ
) by Programming
Switch (hereinafter called ᴘPSᴙ).
LEDProgramming Button