User's Manual

21 By Firstech, LLC By Firstech, LLC 20
Option Programming with Programming Button for AM Units Option Programming with Programming Button for AM Units
ᶀᶀ
Changing Factory Setting to Option Setting. #1
Step1: Turn the key to On position. (Engine Off)
Step2: Press PS (Programming Switch) for two seconds until Parking Light flashes once for Option #1-1 to #1-11, then release the switch. Or, press PS for
four seconds until Parking Light flashes twice for Option #2-1 to 2-10, then release the switch.
Step3: Within 4 seconds after you released the switch, press and release PS for the number of times of the option number you want to change.
Step4: Within 2 seconds, the LED and Parking Lights will flash the same number of times as you pressed the switch at step 3.
Note : If the number of flash does not correspond to what you did at Step 3,
1) wait for 4 seconds until Parking Light flash once for 1 second to reset. If this happens, go to Step 2, or
2) turn the key off and go to the Step1.
Step5: Within 4 seconds from step 4, press PS once for factory setting, the LED and Parking Lights will flash once to confirm. Press PS twice for optional
setting, the LED and Parking Lights will flash twice to confirm.
Step6: If you want to change more options, go to Step 3. However, if you want to change options from Option#1-1 to #1-11 to Option#2-1 to
#2-10 or vice versa,
1) wait for 4 seconds until Parking Light flash once for 1 second to reset. Then go to the Step 2, or
2) turn the key off and go to the Step 1.
ᶀᶀ
Resetting any Option Setting to the Factory Setting
If you want to reset any changes you made to the Factory Setting,
Step1:Turn the key to On position. (Engine Off)
Step2:Press PS (Programming Switch) for two seconds until Parking Light flashes once for Option#1-1 to #1-11, then release the switch.
Or, press PS for four seconds until Parking Light flashes twice for Option#2-1 to #2-10, then release the switch.
Step3:Within 4 seconds after you released the switch, press and release PS for 3 seconds.
Step4: Within 2 seconds, the LED and Parking Lights will flash three times to confirm the above step.
If any of the above steps is not followed correctly, the Parking Lights will flash once for 1 second to reset. If that happens, please start from Step 2.