User's Manual
25 By Firstech, LLC By Firstech, LLC 24
Programming Menu Options Programming Menu Options
Note :
1-1 Some vehicles such as Mercedes-Benz and the Lexus ES300 require you to unlock the car to disarm the factory alarm before remote starting the vehicle.
Activating this feature will unlock the vehicle for a brief second in order to disarm the factory alarm before auto-starting the vehicle remotely then lock after starting.
1-4 This feature unlocks the driverᴗs side door lock with the first unlock pulse. A second unlock pulse is need to unlock the rest of the car doors.
iA
Z@
In order for this feature to operate, the installer must use the
2
nd
Unlock Wire (Or/Bk wire of Connector 4). Isolate the driverᴗs door actuator from
the rest of the other doors. Call us for the technical support if you are not sure about this.
1-7 Turbo mode requires the connection of the emergency brake wire for either or manual transmission vehicles. With this mode, the engine will
continue running for two minutes after the key is turned off if the emergency brake was set before the key was turned off and the foot brake was not being
pressed when the key was turned off.
1-8 Use this feature if you do not use the glow plug wire. “With the Option Programmer, you can program between 3-99 seconds.”
1-9 This option will not be available if you chose 2.5 sec pulse under 1-2.
1-10 Passive Kill The factory setting for the starter-kill relay is Anti-Grinding only. With this optional setting, you can add Passive Starter-kill function, that
will be activated,
1) Whenever doors are locked by the remote, or
2) One minute after the ignition is off, or
3) 30 seconds after the last door is closed if the door trigger is installed and the user's option for Passive Locking
(Button for a half second) is turned on. See Passive Locking of the User's Manual. You can deactivate the starter-kill with the Lock/Unlock button.
1-11 This is only of the manual transmission vehicle. With this option, you have to actively lock the vehicle after the manual transmission reservation.
p@
@
m@
@
CR
Feature
Factory Default Optional
2-1
Cold Start with Temp Sensor
OFF ON
2-2
Timer Start or Minimum 3 Hr 1.5Hr
Interval between Cold Starts
2-3
N/A
2-4
N/A
2-5
Ignition Controlled Door Lock
OFF ON
2-6
N/A
2-7
N/A
2-8
N/A
2-9
N/Ak
2-10
N/A