Operation Manual

6. Ambient Light Measurement

6.1 Mode selection

Press the mode selection button

(c==@)

to select the

Ambient light measurement mode.

6.2 Measuring switch

Press the F/EV/MULTI button (e=@) to select the

desired measuring value display.

Shutter priority measurement

EV exposure value measurement

Exposure priority measurement

After this measurement, you can change the measuring mode by pressing the F/EV/

MULTI button.

NOTE

e The EV (exposure value) shows light value based on the combination

of shutter speed and aperture.

6.3 Shutter speed priority setup

Press the UP or DOWN button to set the desired shutter speed.

NOTE

Your L-408 covers shutter speeds from 30 minutes to 1/8000 sec. After

1/8000 sec. , the shutter speed of 1/200 and 1/400 sec. appears in the

display, then from 8 to 128 frames per second (f/s) for cine speeds can

be set.

6.4 Measurement

Press the measuring switch

(*a)

to start measurement.

Shutter speed priority

measurement is set at "T:1/

125” and “F:2.8+3/10”.

2.8

4 56

1622324154 90

Exposure Value

measurement is set at

“EV10.3”.