Operation Manual

9.1 Exposure index correction

Although your L-408 has been calibrated to exacting

standards, you can manually correct the exposure

within

B.9

EV.

@ Hold down the IS0 button

(@a)

and press the

F/EV/MULTI button (~=a) to change display.

Use the UP/DOWN button

(e@)

for exposure

index correction.

g-,-y;;

mark continues until the exposure index

correction is canceled.

The UP button increases the exposure index 0.1

step at a time (the exposure is reduced), while

the DOWN button decreases the value (the

exposure is increased). Holding down the button

continuously increases or decreases the

exposure index.

(3j To cancel exposure index correction, hold down the UP/DOWN button until the

exposure value reaches zero (0). The

mark goes out.

NOTES

Determine the exposure index values after a sufficient number of tests

in actual photographic conditions.

0 All of the measured values are corrected simultaneously according to

the above correction regardless of

the

metering mode selected such as

incident or reflected light measurement, and ambient or flash

measurement.

---___--

--1_1-I

--____--

-----