Operation Manual

11. Instructions and aintenance
CAUTION
IB Your L-408 exposure meter is water-resistant, but it is NOT water-proof.
Do not wash your L-408 with water, and do not use it in water.
i Water splash
~ i
DO not wash with a water.
Rain Do not use in a water.
@ To avoid damaging the exposure meter, never drop it or subject it to
impact.
@ Avoid keeping the exposure meter in places of high temperature or
humidity.
b Avoid excessive temperature changes, otherwise, condensation will
occur, resulting in malfunction.
MAINTENANCE NOTES
a If your L-408 is splashed with water, immediately wipe it with a soft and
dry cloth. Water leakage could cause corrosion or system malfunction.
@ Avoid applying excessive force to the rubber seal of the battery case
cover, Also, do not attempt to remove the rubber seal, otherwise, water
invasion, corrosion or malfunction will result.
e If the rubber seal is scratched or damaged, water invasion, corrosion or
malfunction will result. Consult the dealer where the L-408 was
purchased if this occurs.
* Keep the surfaces of the lumisphere, lens and objective cover clean and
free from dust, foreign particles and scratches.
* Wipe off dirt with a soft or silicon cloth. Never use solvent such as
thinner or benzine.
23