Operation Manual

2. Display
.~~
2.1 LCD panel
@ Mode selection
m Ambient light measurement
Flash measurement without cord
Flash measurement with cord
The mode symbols are switched in the following sequence:
@ Aperture/EV/Battery/Others
“b.c” Battery capacity 2‘:“; See Page 7.
Eu
Eo
I
- -
Aperture value (Indicated by a number
and dots
2’:‘i ) See Page 11.
Aperture-priority measurement
E xposure value (Indicated by a number
and dots
$:‘$
) See Page 11.
Under exposure
Over exposure
The mark flashes during Reflected Light
Metering. See Page 6.
One full stop is shown by 9 bars.
A single bar indicates one tenth stop.
2