SDS

7.2
7.2 Conditions for storage, including incompatibilities
Storage
Keep container tightly closed, dry, and upright. Protect from contamination.
Always keep in containers of the same material as the original material.
Keep in a cool well-ventilated place.
Keep away from heat and sources of ignition.
Keep in properly labelled containers.
Keep away from combustible materials.
Provide tight electrical equipment well protected against corrosion.
Keep away from tobacco products.
Stable under recommended storage conditions. For further information see Section 10 .
Recommended Storage Temperatures:
Min 0°C
Max 40°C
Packaging materials
Incompatibilities
Keep away from:
Combustible materials, flammable materials, non-aqueous alkalis, molten alkali metals.
7.3
Specific end uses
Lubricating greases and fluids
For further information on specific applications, please contact: Aerospace Lubricants, Inc.
7.4
Other information
Provide tight electrical equipment well protected against corrosion.
Refer to protective measures listed in sections 7 and 8.
Occupational exposure limit values:
8.2 Environmental exposure controls:
General:
Engineering Controls:
8.3
Respiratory protection :
Hand protection :
Eye/face protection :
Skin & body protection :
General hygiene measures :
Additional information :
If risk of decomposition, wear: rubber or neoprene gloves (EN 374).
Recommended: Rubber, neoprene, or nitrile gloves.
If splashes are likely to occur, wear: Tightly fitting safety goggles
In case of high-temperature processing wear: Tightly fitting safety goggles
Recommended: Normal chemical work clothing (Long-sleeved clothing, safety shoes)
If splashes are likely to occur, wear: Coverall, chemical splash goggles, face shield.
In case of high-temperature processing wear: Heat resistant clothing and footwear.
9. PHYSICAL AND CHEMICAL PROPERTIES
These precautions are for room temperature handling. Use at elevated temperatures or conditions that generate fine
particles may require additional precautions.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
The information in this section contains generic advice and guidance. Specific situations may require additional actions.
Apply technical measures to comply with the occupational exposure limits.
Wash hands before breaks and at the end of workday.
Handle in accordance with good industrial hygiene ands safety practice.
Regularly clean equipment, work area and clothing.
Limit
When using, do NOT eat, drink or smoke.
Refer to protective measures listed in sections 7 and 8.
Ensure that eyewash stations and safety showers are close to the workstation location.
Recommeded: Dust mask, if working with dusty materials. Respirator, if working with hot materials.
Select and use gloves based on the likelihood and severity of exposure, following manufacturers' recommendations.
In case of decomposition (Sec. 10), wear a suitable respirator with a combination filter for organic vapor & particulate.
Use only respiratory protection that conforms to national / international standards, such as NIOSH.
In case of high-temperature processing wear: heat resistant gloves. (EN 407).
Dispose of rinse water in accordance with local and national regulations.
Do not breathe fumes evolved from hot lubricant materials.
Recommended: Safety glasses with side-shields (EN 166)
Comments
Source
Ingredient Name:
Use respirator when performing operations involving potential exposure to dust clouds or product vapor.
Type
Provide appropriate local exhaust when product is heated.
Personal protective measures and equipment:
M:\TriboSDS\English SDS Creator 15-0520 4 Prepared: 6/24/2015