SDS

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
778982 - Turbine Oil & Ultra Clean Turbine Oil
Page 2/7
Date of Issue: 03-Apr-2014 Status: FINAL
Most important symptoms and effects, both acute and delayed: Inhalation of oil mists or vapors generated at elevated
temperatures may cause respiratory irritation. Accidental ingestion can result in minor irritation of the digestive tract, nausea and
diarrhea. Dry skin and possible irritation with repeated or prolonged exposure.
Notes to Physician: Acute aspirations of large amounts of oil-laden material may produce a serious aspiration pneumonia.
Patients who aspirate these oils should be followed for the development of long-term sequelae. Inhalation exposure to oil mists
below current workplace exposure limits is unlikely to cause pulmonary abnormalities.
Section 5: Fire-Fighting Measures
NFPA 704 Hazard Class
Extinguishing Media: Dry chemical, carbon dioxide, foam, or water spray is recommended. Water or foam may cause frothing of
materials heated above 212°F / 100°C. Carbon dioxide can displace oxygen. Use caution when applying carbon dioxide in
confined spaces. Simultaneous use of foam and water on the same surface is to be avoided as water destroys the foam.
Specific hazards arising from the chemical
Unusual Fire & Explosion Hazards: This material may burn, but will not ignite readily. If container is not properly cooled, it
can rupture in the heat of a fire.
Hazardous Combustion Products: Combustion may yield smoke, carbon monoxide, and other products of incomplete
combustion. Oxides of sulfur, nitrogen or phosphorus may also be formed.
Special protective actions for firefighters: For fires beyond the initial stage, emergency responders in the immediate hazard
area should wear protective clothing. When the potential chemical hazard is unknown, in enclosed or confined spaces, a self
contained breathing apparatus should be worn. In addition, wear other appropriate protective equipment as conditions warrant
(see Section 8).
Isolate immediate hazard area and keep unauthorized personnel out. Stop spill/release if it can be done safely. Move undamaged
containers from immediate hazard area if it can be done safely. Water spray may be useful in minimizing or dispersing vapors and
to protect personnel. Cool equipment exposed to fire with water, if it can be done safely. Avoid spreading burning liquid with water
used for cooling purposes.
See Section 9 for Flammable Properties including Flash Point and Flammable (Explosive) Limits
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: This material may burn, but will not ignite readily.
Keep all sources of ignition away from spill/release. Stay upwind and away from spill/release. Avoid direct contact with material. For
large spillages, notify persons down wind of the spill/release, isolate immediate hazard area and keep unauthorized personnel out.
Wear appropriate protective equipment, including respiratory protection, as conditions warrant (see Section 8). See Sections 2 and
7 for additional information on hazards and precautionary measures.
Environmental Precautions: Stop spill/release if it can be done safely. Prevent spilled material from entering sewers, storm
drains, other unauthorized drainage systems, and natural waterways. Use water sparingly to minimize environmental contamination
and reduce disposal requirements. If spill occurs on water notify appropriate authorities and advise shipping of any hazard. Spills
into or upon navigable waters, the contiguous zone, or adjoining shorelines that cause a sheen or discoloration on the surface of
the water, may require notification of the National Response Center (phone number 800-424-8802).
Health: 0 Flammability: 1 Instability: 0
0 (Minimal)
1 (Slight)
2 (Moderate)
3 (Serious)
4 (Severe)