Senco Products Inc. 8485 Broadwell Road Cincinnati, Ohio 45244 PC1131 Electric Air Compressor Operating Instructions C US © 2006, 2007 by Senco Products, Inc. Warnings for the safe use of this tool are included in this manual. Questions? Comments? call SENCO’S toll-free Action-line: 1-800-543-4596 or e-mail: toolprof@senco.com Visit our Website www.senco.
3
7
COMPRESSOR FEATURES 4 10 6 11 7 8 9 15 1 3 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 12 2 15 16 14 13 8 Motor/Pressure Switch Motor Thermal Overload Air Intake Filter Air Compressor Pump Safety relief valve Air Tank Drain Valves Air Tank Pressure Gauge Outlet Pressure Gauge Pressure Regulator Dipstick Oil Drain Delivery tube 115 Volt electric power cord Ventilation openings/ protective shroud Quick disconnect Cold start valve
COMPRESSOR FEATURES 1) MOTOR/PRESSURE SWITCH: This switch is used to start or stop the air compressor. Moving the switch to the "Auto" (On) position will provide automatic power to the pressure switch which will allow the motor to start when the air tank pressure is below the factory set "cut-in" pressure. When in the On Position, the pressure switch stops the motor when the air tank pressure reaches the factory set "cut-out" pressure.
2. 3. Add entire contents of oil from enclosed bottle prior to starting compressor. 4. Remove plug from cylinder head port and replace with air filter.
OPERATION PRE-START CHECKLIST: 1. Check oil level. Add if necessary. 2. Remove any moisture in the air compressor air tank. Remove excessive pressure with an air tool, then open the air tank drain valve in the bottom of the air tank. Close tightly when drained. WARNING: Risk of bodily injury. NEVER attempt to open the drain valve when more than 10 PSI of air pressure is in the air tank! 3. 4. 5. 6. Make sure the air compressor Motor Switch is in the “OFF” position.
ON position, motor runs continuously.
13
14
PC1131 2.0 running, 2.5 peak 3400 Oil Capacity 90 12 oz. 3.7 70 seconds 16 seconds 60 lbs 65 Running Duty Type Noise 20”x14.5”x16.
Limited Warranty SENCO® Pneumatic, DuraSpin®, Cordless Tools & Compressors Senco Products, Inc. (“SENCO”) designs and constructs its products using the highest standards of material and workmanship.
