User's Manual

Wireless Mini-PCI Card Version: 0.9
Page 16 of 26
 SSID: displays the SSID of the Access Point.
 LQ: displays the link quality of the Access Point.
 C: displays the channel number of the Access Point.
 BSSID: displays the MAC address of the Access Point.
 W: indicates whether WEP is enabled.
 Mode: indicates whether the SSID is a Station (STA) or Access Point (AP).
 WPA: indicates whether WPA (Wi-Fi Protected Access) is enabled.
 Connect: to connect with a specific Access Point, select the Access Point
from the drop-down list, and then click on the Connect button.
 Scan: to view a list of Access Points in the area click on the Scan button.
 Click on the Apply or OK button if you have made any changes.
3.3.5 IBSS
The IBSS tab displays IBSS Channel Selection. You may select a channel from
the list, or click on the Default button, for a default channel. The image below
depicts the IBSS tab.