User's Manual

33
VIII
BASIC OPERATIONS
8.1 INITIAL CHECKS
ATTENTION
Before turning on the borescope:
• Insert the SD card, otherwise all image capture and video recording
functionality will be inoperative.
• Check the lens for any dirt, grime or debris. Clean as necessary, using the cleaning
swabs provided, being careful not to ex the bending section while doing so.
8.2 TURNING ON / OFF
Press the on-o button (see Fig. 8-2) near the top corner of the base unit.
e borescope will power up and the LCD will display the real-time image
captured by the camera / LED module.
Fig. 8-1 Cleaning the camera at the end of the insertion tube
Fig. 8-2 On / O button and
Flashlight button