Quick Guide ADN PS
Table Of Contents
- Contents
- For your safety
- The ADN PS power supply
- Package contents
- Components required for operation
- Product overview ADN PS power supply
- Structuring and controlling the conference system
- Preparing the ADN PS power supply for operation
- Setting up the conference system
- Basic information on the set-up of the conference system
- Setting up a small conference system with only the central unit
- Connecting ADN PS power supplies to the ADN CU1 central unit
- Setting up a large conference system comprising ADN PS power supplies and conference units connected in cable strings
- Setting up a large conference system comprising ADN PS power supplies conference units connected in redundant ring topology
- Switching the ADN PS power supply on/off
- Cleaning and maintaining the conference system
- Specifications ADN PS
ADN PS | 15
Cleaning and maintaining the conference system
Cleaning and maintaining the
conference system
왘 Switch the conference system off (see page 14).
왘 Before cleaning, disconnect the ADN CU1 central unit and the ADN PS power
s
upplies from the mains power supply.
왘 Only use a dry and soft cloth to clean the product.
To ensure optimum cooling of the ADN CU1 central unit and the ADN PS power
su
pplies:
왘 Clean the air vents on the front, back and bottom
from time to time with a soft
brush or paintbrush in order to avoid dust deposits.
CAUTION
Liquids can damage the product!
Liquids entering the product can cause a short-circuit in the electronics or damage
the mechanics.
Solvents or cleansing agents can dama
ge the surfaces of the product.
왘 Keep all liquids away from the product.
왘 Do not use any solvents or cleansing
agents.
ADN CU1
ADN PS