Quick Guide ADN PS
Table Of Contents
- Contents
- For your safety
- The ADN PS power supply
- Package contents
- Components required for operation
- Product overview ADN PS power supply
- Structuring and controlling the conference system
- Preparing the ADN PS power supply for operation
- Setting up the conference system
- Basic information on the set-up of the conference system
- Setting up a small conference system with only the central unit
- Connecting ADN PS power supplies to the ADN CU1 central unit
- Setting up a large conference system comprising ADN PS power supplies and conference units connected in cable strings
- Setting up a large conference system comprising ADN PS power supplies conference units connected in redundant ring topology
- Switching the ADN PS power supply on/off
- Cleaning and maintaining the conference system
- Specifications ADN PS
Structuring and controlling the conference system
6 | ADN PS
Small conference system with simple cabling
For small conference systems with approx. 30-40
conference units, you require one
ADN CU1 central unit for controlling the conference. The conference units are inter-
connected in two cable strings which are directly connect
ed to the central unit.
Large conference system with simple cabling
For setting up a large conference system w
ith the maximum number of conference
units (i.e. up to 400), you require one ADN CU1 central unit for controlling the con-
ference and additional ADN PS power supplies for powering the conference units.
The conference units are interconnected in cable strings and up to four cable
strings can be connected to each ADN PS power supply.
PORT I
PORT II
ADN CU1
max. 50 m
approx. 2–5 m
52.8 V
>35 V
20
1
2 3
...
approx. 2–5 m
max. 40
ADN D1/ADN C1
ADN CU1
ADN CU1
ESC
ADN CU1
ESC
PORT I/II
PORT I 2
PORT I 1
PORT II 1
PORT II 2
ADN PS (max. 15)
ADN CU1
max. 50 m
approx. 2–5 m
approx. 2–5 m
52.8 V
>35 V
20
1
2 3
...
max. 50 m
ADN CU1
ADN PS
max. 70
ADN D1/ADN C1
ADN CU1
ESC
ADN CU1
ESC