Quick Guide ADN PS
Table Of Contents
- Contents
- For your safety
- The ADN PS power supply
- Package contents
- Components required for operation
- Product overview ADN PS power supply
- Structuring and controlling the conference system
- Preparing the ADN PS power supply for operation
- Setting up the conference system
- Basic information on the set-up of the conference system
- Setting up a small conference system with only the central unit
- Connecting ADN PS power supplies to the ADN CU1 central unit
- Setting up a large conference system comprising ADN PS power supplies and conference units connected in cable strings
- Setting up a large conference system comprising ADN PS power supplies conference units connected in redundant ring topology
- Switching the ADN PS power supply on/off
- Cleaning and maintaining the conference system
- Specifications ADN PS
ADN PS | 7
Structuring and controlling the conference system
Large conference system with redundant ring topology
The redundant ring topology ensures that, sho
uld one conference unit or system
cable fail or be manipulated, all other conference units of the cable ring will
continue to function reliably.
For setting up a large conference system with redun
dant ring topology, you require
one ADN CU1 central unit for controlling the conference and additional ADN PS
power supplies for powering the conference units. The conference units are inter-
connected in rings and two rings can be connected to each ADN PS power supply.
When connecting the conference units to
an ADN PS power supply, you can
mix different cable topologies (simple cabling with cable strings or redun-
dant ring topology).
PORT I/II
ADN PS (max. 15)
ADN CU1
max. 50 m
approx. 2–5 m
approx. 2–5 m
52.8 V
>35 V
20
1
2 3
...
max. 50 m
ADN CU1
ADN PS
max. 40
ADN D1/ADN C1
PORT I 2
PORT I 1
PORT II 1
PORT II 2
ADN CU1
ESC
ADN CU1
ESC