Specification

SENSAPHONE
Monitoring Solution
Low Cost Web Based Monitoring
WEB600
Description
The Sensaphone WEB600 is designed to be an
easy, cost–effective, network–based monitoring
system to notify you when equipment or
conditions go awry. The internet browser–based
programming makes the device easy to use
from any computer on your network. Monitored
conditions can include temperature, humidity
levels, line voltage, leak detection, UPS
systems, and more. The system allows multiple
users to be notified immediately of any detected
problems. Notification can occur via e–mail,
SMS (text message) or SNMP trap. An optional
battery backup system (FGD-W610-B) insures
that the unit will continue to run if main power
fails.
Description Part Number
WEB600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FGD-W600
 Six sensor inputs to monitor environmental
conditions and/or alarm contacts from other
computer equipment such as UPS systems.
 10/100BASE-T Ethernet port.
 Optional battery backup for uninterrupted
performance.
 Compact design allows for wall-mount or tabletop
installation.
 Embedded web page to program and manage your
Web600 system.
 Notification via e–mail, SMS (text message) or
SNMP trap.
 Can be accessed via Modbus®TCP protocol and
function as a slave device.
E–Mails
Text Messages
SNMP Traps
Ethernet
Data log
Web Page
6 Universal Inputs
1 Relay Output
Battery Backup
Package Contents
(1) Sensaphone WEB600
(1) Instruction Manual
(1) Screwdriver
Sensaphone • 901 Tryens Road • Aston, PA 19014 • 877–373–2700 • www.sensaphone.com