User's Manual

Appendix E - Command Line Interface
get beaconinterval Display Beacon Interval
get channel Display Radio Channel
get country Display Country/Domain
get defaultkey Display Default Key Index
get description Display Access Point Description
get dhcp Display DHCP Mode
get dhcpserverendip Display DHCP Server End IP Address
get dhcpserverstartip Display DHCP Server start IP Address
get dnsserver Display IP Address of DNS Server
get
dot1xdynkeyupdate
Display 802.1x Dynamic Key Update Mode
get dot1xdynkeylife Display 802.1x Dynamic Key Life Time (in Minutes)
get dot1xkeytype Display 802.1x Distribute Key Method
get fragthreshold Display Fragment Threshold
get gateway Display Gateway IP Address
get gtkupdate Display Group Key Update Mode
get gtkupdateinterval Display Group Key Update Interval (in Seconds)
get http Display HTTP Mode
get httpport Display HTTP Port Number
get https Display HTTPS Mode
get httpsport Display HTTPS Port Number
get ipaddr Display IP Address
get ipmask Display IP Subnet Mask
get isolation Display Isolate All Virtual APs State
get key Display WEP Key Value
get keylength Display WEP Key Length
get lltd Display LLTD Mode
get md5supplicant Display 802.1x MD5 Supplicant Mode
get md5suppname Display 802.1x Supplicant MD5 Name
get md5supppassword Display 802.1x Supplicant MD5 Password
get md5supptype Display 802.1x MD5 Supplicant Type
get nativevlanid Display Native VLAN ID
get ntp Display NTP Server IP Address
get operationmode Display Operation Mode
get password Display Login Password
97