User's Manual

Wireless Access Point User Guide
set dnsserver Set DNS Server IP Address
set dot1xdynkeyupdate Set 802.1x Dynamic Key Update Mode
set dot1xdynkeylife Set 802.1x Dynamic Key Life Time (in Minutes)
set dot1xkeytype Set 802.1x Distribute Key Method
set fragthreshold Set Fragment Threshold
set gateway Set Gateway IP Address
set groupkeyupdate Set Group Key Update Mode
set groupkeyupdatein-
terval
Set Group Key Update Interval (in Minutes)
set http Set HTTP Mode
set httpport Set HTTP Port Number
set https Set HTTPS Enable/Disable
set httpsport Set HTTPS Port Number
set ipaddr Set IP Address
set ipmask Set IP Subnet Mask
set isolation Set Isolate All Virtual APs State
set key Set WEP Key Value
set keylength Set WEP Key Length
set lltd Set LLTD Mode
set md5supplicant Set 802.1x MD5 Supplicant Mode
set md5suppname Set 802.1x Supplicant MD5 Name
set md5supppassword Set 802.1x Supplicant MD5 Password
set md5supptype Set 802.1x MD5 Supplicant Type
set nativevlanid Set Native VLAN ID
set ntp Set NTP Server IP Address
set operationmode Set operation Mode
set password Modify Login Password
set psk Modify Pre-shared Key
set radiusserver Set RADIUS IP Address
set radiusport Set RADIUS Port Number
set radiussecret Set RADIUS Shared Secret
set remoteptmp Set PTMP's Remote MAC Address List
set remoteptp Set Remote PTP MAC Address
set roguedetect Set Rogue AP Detection Mode
set rogueinteval Set Interval of Rogue AP Detection(Range: 3 ~ 99)
100