User's Manual

Wireless Access Point User Guide

Native VLAN

Enter the desired value for the Native VLAN. Default value is 1.

AP Management

VLAN

Define the VLAN ID used for management.

VLAN List

Define the unique ID value (1 - 4094) for each VAP.

Network Integrality Check

Enable Network

Integrality

Check

If enabled, the AP will disable the wireless connection if the wired

connect of AP is invalid.

LLTD

Enable Link

Layer Topology

Discovery

Enable this if you want to use Link Layer Topology Discovery proto-

col (LLTD) feature.

STP

Enable Spanning

tree Protocol

Enable this if you want to use this feature.

802.1x Supplicant

Enable 802.1x

Supplicant

Enable this if your network requires this AP to use 802.X authentica-

tion in order to operate.

Authentication

x Authentication via MAC Address

Select this if you want to Use MAC Address for Authentication.

x Authentication via Name and Password

Select this if you want to Use name and password for Authentica-

tion.