User's Manual

Wireless Access Point User Guide

Data - WEP Screen

WEP

Data

Encryption

Select the desired option, and ensure your Wireless stations have the

same setting:

x 64 Bit Encryption - Keys are 10 Hex (5 ASCII) characters.

x 128 Bit Encryption - Keys are 26 Hex (13 ASCII) characters.

x 152 Bit Encryption - Keys are 32 Hex (16 ASCII) characters.

Authentication

Normally, you can leave this at “Automatic”, so that Wireless Stations

can use either method ("Open System" or "Shared Key".).

If you wish to use a particular method, select the appropriate value -

"Open System" or "Shared Key". All Wireless stations must then be set

to use the same method.

Key Input

Select "Hex" or "ASCII" depending on your input method. (All keys

are converted to Hex, ASCII input is only for convenience.)

Key Value

Enter the key values you wish to use. The default key, selected by the

radio button, is required. The other keys are optional. Other stations

must have matching key values.

Passphrase

Use this to generate a key or keys, instead of entering them directly.

Enter a word or group of printable characters in the Passphrase box

and click the "Generate Key" button to automatically configure the

WEP Key(s).