User's Manual

Access Point Setup
Advanced Settings
Clicking the Advanced Settings link on the Wireless menu will result in a screen like the
following.
Figure 25: Advanced Settings
Data - Advanced Settings Screen
Options
Worldwide Mode
(802.11d)
Enable this setting if you wish to use this mode, and your
Wireless stations support this mode.
WMM
Enable WMM Support
Check this to enable WMM (Wi-Fi Multimedia) support in the
Access Point. If WMM is also supported by your wireless
clients, voice and multimedia traffic will be given a higher
priority than other traffic.
No Acknowledgement
If enabled, then WMM acknowledgement is disabled. Depend-
ing on the environment, disabling acknowledgement may
increase throughput slightly.
Parameters
Disassociated Timeout
This determines how quickly a Wireless Station will be consid-
ered "Disassociated" with this AP, when no traffic is received.
Enter the desired time period.
Fragmentation Length
Enter the preferred setting between 256 and 2346. Normally,
this can be left at the default value.
Beacon Interval
Enter the preferred setting between 20 and 1000. Normally, this
can be left at the default value.
37