User's Manual

Wireless Access Point User Guide

Log Settings

If you have a Syslog Server on your LAN, this screen allows you to configure the Access Point

to send log data to your Syslog Server.

Figure 62: Syslog Settings Screen

Data - Syslog Settings Screen

Syslog Server

Select the desired Option:

x Disable - Syslog server is not used.

x Broadcast - Syslog data is broadcast. Use this option if

different PCs act as the Syslog server at different times.

x Unicast - Select this if the same PC is always used as the

Syslog server. If selected, you must enter the server ad-

dress in the field provided.

Server Name/IP Address

Enter the name or IP address of your Syslog Server.

Minimum Severity Level

Select the desired severity level. Events with a severtiy level

equal to or higher (i.e. lower number) than the selected level

will be logged.

Email Alerts

If enabled, an E-mail will be sent. If enabled, the e-mail

address information (below) must be provided.