User's Manual

Wireless Access Point User Guide

Problem 2:

My PC can't connect to the LAN via the Wireless Access Point.

Solution 2

Check the following:

x The SSID and WEP settings on the PC match the settings on the Wire-

less Access Point.

x On the PC, the wireless mode is set to "Infrastructure"

x If using the Access Control feature, the PC's name and address is in the

Trusted Stations list.

x If using 802.1x mode, ensure the PC's 802.1x software is configured

correctly. See Chapter 4 for details of setup for the Windows XP 802.1x

client. If using a different client, refer to the vendor's documentation.