Operation Manual

166 Pictures, Lines, and Shapes
2. (Optional) Pick a Brush size suitable for the area to be worked on.
3. (Optional) Set a Grow tolerance value to automatically expand the
selected area under the cursor (by detecting colors similar to those
within the current selection). The greater the value the more the
selected area will grow.
4. Using the circular cursor, click and drag across the area to be retained.
It's OK to repeatedly click and drag until your selection area is made.
The button reverts to the last made selection.
5. If you're outputting an alpha-edged bitmap, you can refine the area to
be kept/discarded within Image Cutout Studio (only after previewing)
with Erase and Restore touch-up tools. Vector-cropped images can be
cropped using standard PagePlus crop tools outside of the Studio.
Make your outline edge as exact as possible by using brush and
touch-up tools before committing your work.
6. Click to create your cutout, or click .
You'll see your image in your publication in its original location, but with the
selected areas cut away (made transparent).
Click if you want to revert your selected areas and
start your cutout again.