Operation Manual

Pictures, Lines, and Shapes 167
Refining your cutout area (alpha-edged bitmaps only)
If a vector-cropped image is created via Image Cutout Studio it's possible to
subsequently manipulate the crop outline using crop tools. However, for alpha-
edged bitmaps, Erase and Restore touch-up tools can be used to refine the cutout
area within the Studio before completing your cutout. The latter can't be edited
with crop tools.
The touch-up tools are brush based and are only to be used to
fine-tune your almost complete cutout—use your Keep and
Discard brush tools for the bulk of your work!
To restore or remove portions of your cutout:
1. With your cutout areas already defined, click
(Output
settings tab). You can use the button to check your cutout as you
progress.
2. Click the Restore Touch-up Tool or Erase Touch-up
Tool button from the left of the Studio workspace.
3. Paint the areas for restoring or erasing as you would with the brush
tools.
4. Click .
If you've touched up part of your image between each preview,
you'll be asked if you want to save or discard changes.