Operation Manual

226 Printing and Publishing
Manual duplex printing
Printing to duplex printers can give your greetings cards and other documents
the edge. It can also save money by allowing you to use less paper. However,
not all printers have this built-in duplexing function and are considered simplex
(supporting single-sided printing only). Using the Manual Duplex Printer Setup
wizard, you can overcome this limitation of simplex printers by flipping pages
in the printer's paper tray when prompted—your publication prints double-sided!
To setup, the wizard asks you printer-related questions. You'll need to:
• Consider how you offer paper to your printer.
• Print a test page, check which side printed, then reinsert the page as
instructed.
To print, you need to select a Manual Duplex double-sided option.
Double-sided printing to duplex printers is unaffected by
PagePlus's manual duplex printing.
To set up your printer for manual duplex printing:
1. From the Print dialog's General tab, select and configure the printer
that you wish to use.
2. From the dialog's Duplex tab, click
.
3. Follow the Wizard instructions and select the options that apply to
your printout and follow instructions (and insert test pages) where
prompted.
Click Next when you are ready to proceed through the setup.
4. Click Finish.
To adjust the printer setup without running the wizard again, use the equivalent
settings in the Duplex tab (under the above button).