Operation Manual

Working with Objects 77
• Allow the overlap. The overlap is left as is.
• Pack into lines means the second object will be placed
beside the first object if there is room, or below it if not.
• Line up left to right/Line up right to left means the second
object will be placed to the right or the left of the first object,
respectively.
• Stack top to bottom/Stack bottom to top means the second
object will be placed below or above the first object,
respectively.
6. Click OK. The object appears inline with text, and shows an
Anchor Properties icon.
Objects inserted into text frames will automatically be anchored using "Float
with text" default settings. However, the anchored object can be dragged away
from the anchor point as an alternative method for creating an anchored object.
To view anchor properties:
1. Select an anchored object.
2. Click
Anchor Properties shown under the object.
The Anchored Object Properties dialog is displayed. The options differ
depending on which of the three positioning options is enabled.
If you'd like to change the position of an anchor point you can drag it anywhere
else in your text frame. Dragging to an area of no text will disconnect your
anchored object. You can also disconnect the anchor point via Anchor Properties
dialog.
To disconnect an anchored object:
• Enable Detach from text.
The Anchor Properties button and anchor point both disappear.