User Manual

Model #: 43670/43504/43505

EXECUTIVE CHAIR

1. To Adjust Seat Height:

While seated, lean forward and reach under the right

side of the chair to find the handle. Lift the handle and

raise your body up slightly to allow the chair to rise to

the desired height. To lower the seat, lift the handle

while applying more weight downward on the seat.

The chair will descend until the handle is released or

the chair reaches the bottom position.

2. To Operate Tilt Lockout:

While seated, reach under the right side of the chair

to find the height adjustment handle. Pull the handle

all the way out (away from the gas lift) to allow the

chair to tilt backwards. To lock the chair in the upright

or vertical position, sit upright and push the handle in

towards the gas lift.

3. To Adjust Tension on The Tilt

Mechanism:

Reach under the front center of the chair, grasp the

round knob and turn counter- clockwise to make the

tilt mechanism firmer (stiffer). To make the tilt

mechanism less firm, turn the knob clockwise until

the desired resistance is found.

OPERATING INSTRUCTIONS

PAGE 1
EXECUTIVE OPERATING INSTRUCTIONS 1. To Adjust Seat Height: While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. To lower the seat, lift the handle while applying more weight downward on the seat. The chair will descend until the handle is released or the chair reaches the bottom position. 2.
PAGE 2
EXECUTIVE CHAIR P A R T S Part # 1. 2. 3. 4. 5. 6A. 6B. 7. 8. 9. 10. 11. 12. 13. A S S E M B L Y A. B. C. D. E. F. G. H. I. J. L I S T Description Casters 5 Star Base Telescoping Cover Gas Lift Seat Plate Left Arm Right Arm Seat Cushion Back Cushion 1-5/8” Big Screws 7/8” Big Screws 1-1/2” Small Screws Black Plastic Caps Allen Keys Quantity 5 1 1 1 1 1 1 1 1 2 2 8 8 2 I N S T R U C T I O N S Remove all parts from carton and separate them into part number groups as indicated in parts list.