Super Task Chair Silla Super Task Assembly Instructions Instrucciones de Ensamblaje Model/ Modelo: 43676
Parts/Partes A Casters Ruedas Quantity/cantidad: 5 E1 Left Arm Brazo izquierdo Quantity/cantidad: 1 B Star Base Base en forma de estrella Quantity/cantidad: 1 E2 Right Arm Brazo derecho Quantity/cantidad: 1 C Gas Lift with Telescoping Cover Elevador neumático y cubierta telescópica Quantity/cantidad: 1 F D Seat Plate Mecanismo del asiento Quantity/cantidad: 1 G Knobs (pre-assembled with arms) Seat Cushion Perillas (vienen incorporadas a los Cojín del asiento brazos) Quantity/cantidad: 1 Quantity/c
H Back Cushion Cojín del respaldo Quantity/cantidad: 1 I J K 1” Big Screws Tornillos grandes de 25mm 1-1/4” Big Screws Tornillos grandes de 32mm Allen Key M5 Llave allen M5 Quantity/cantidad: 2 Quantity/cantidad: 2 Quantity/cantidad: 1 Step 1 Place the Star Base (B) upside down and insert 5 Casters (A) into the holes on the Star Base (B). Step 2 Turn the Star Base (B) over and insert the Gas Lift with Telescoping Cover (C) through the center hole on top of Star Base (B).
K E2 FRONT J I G E1 D FR G ON T FR ON T FRONT R F 4 FRONT L F Step 3 Take off the Knobs (F) from the Arm Brackets (E1 & E2), insert the Arm Brackets (E1 & E2) into the sockets on the bottom of Seat Cushion (G) and fasten by using the knobs (F) . Step 4 Attach the Seat Plate (D) to the bottom of the Seat Cushion (G) (with the front of the seat plate facing the front of seat cushion).
H G D C G D Step 5 Position the assembled chair upright with the Seat Plate (D) facing down. Insert the Gas Lift with Telescoping Cover (C) into the center hole of the Seat Plate (D) and press down until fully engaged. Step 6 Align Back Cushion (H) with Seat Cushion (G) by inserting back support plate into the rear hole of the Seat Plate (D) as shown and tighten by using the knob on the rear right side of the Seat Plate (D). Check to make sure the knob is loose before this step.
Operating Instructions Instrucciones de Uso Function Instruction-1 To Adjust Seat Height: While seated, reach under the right side of the chair to find the handle 1. Lift the handle and raise your body up slightly to allow the chair to raise to the desired height. To lower the seat, lift the handle while applying more weight downward on the seat. The chair will descend until the handle is released or the chair reaches the bottom position.
Function Instruction-2 To Operate the Tilt: While seated, lean backward and reach under the right side of the chair to find handle 2. When the handle is placed in the level position, leaning back to allow the chair to tilt backwards. Push down the handle to lock the angle while the desired position is reached. Instrucciones de Funcionamiento-2 Para operar la inclinación: Estando sentado, inclínese hacia atrás y estire la mano por debajo del lado derecho del sillón hasta alcanzar la manija. 2.
Function Instruction-3 To Adjust Back Cushion Angle: While seated, lean backward and reach under the right side of the chair to find the handle 3. When the handle is placed in the level position, tilting your body backwards to adjust the angle of back cushion, push down the handle to lock the back angle while the desired angle is reached.
Function Instruction-4 To Adjust the Back Cushion Height: Loosen the knob on the rear right side of the seat plate, then lift up the back cushion, tighten the knob once the desired back height is reached. Instrucciones de Funcionamiento-4 Para ajustar la altura del cojín del respaldo: Afloje la perilla situada en el lado derecho posterior de la plancha del asiento, después levante el cojín del respaldo y ajuste la perilla una vez que la altura del respaldo sea la deseada.
Function Instruction - 5 To Adjust Arm Height: Press the buttons on the chair arms. Press the buttons to allow the arms to move up or down freely then release the buttons once the desired height is reached. Instrucciones de Funcionamiento - 5 Para ajustar la altura de los brazos: Presione los botones de los brazos de la silla. Presione los botones para permitirle que se muevan los brazos libremente y después libere los botones una vez que alcance la altura deseda.
Function Instruction-6 To Adjust Arm Width: Reach for the knobs underneath the arms located on bottom of seat cushion. Turn the knobs counter - clockwise to loosen the width adjustment feature then turn the knobs clockwise to tighten when you have reached your desired width. Instrucciones de Funcionamiento-6 Para ajustar la distancia entre los brazos: Ubique las perillas situadas en la parte inferior del cojín del asiento, debajo de los brazos.
Function Instruction-7 To Adjust Mechanical Lumbar: While seated, reach to the right side of the back cushion to find the adjustment knob for the mechanical lumbar. Turn the knob clockwise to increase the lumbar support. To reduce the lumbar support, turn the knob counter – clockwise. Turn the knob until the desired support is reached.
Function Instruction - 8 To Adjust Tension On The Tilt: Reach under the front center of the chair, grasp the round knob (N) and turn it counter - clockwise to stiffen the tilt mechanism for a heavier user. Turn the knob (N) clockwise to loosen the tilt mechanism for a lighter user. Rotate the knob (N) until the desired resistance is reached.
Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt. This warranty does not apply to “as is” or previously owned seating products.
Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así demostrado por el recibo original. Esta garantía no le aplica a muebles usados comprados “como tales”.