How to Guide

You may now connect your headboard to the attachment plates

using the remaining short bolts and nuts to secure it to the

brackets. The heads of the bolts will face outward. Use a 9/16"

socket and 1/2" wrench to tighten the bolts.

headboard bracket installation guide (optional)

STEP 1 STEP 2

STEP 3

a.) Align the hole in the bracket to the brass sleeve into which

the leg threads. Hold the bracket in place and screw the leg

into the base until it is snug. DO NOT OVERTIGHTEN. Too

much force may cause the leg to spin freely.

b.) Align the tab with the hole in the frame (located towards the

foot of the base) and use a short bolt and nut to secure the

bracket. Make sure the bolt is tight.

Attach the plastic spacer and T-Bracket.

a.) Measure the distance between the mounting holes on the

headboard and install the spacer and attachment plate to

accommodate the headboard.

b.) To install the plastic spacer and attachment plate, you will

need two (2) long bolts and two (2) nuts. Place the spacer

and attachment plate in the desired location and slip the bolts

through the holes with the head of the bolt facing outward.

Position the bolts diagonally on the spacer. Use the 9/16”

socket and wrench to tighten the bolts.

Headboard Brackets are an optional accessory and are not included.

A 9/16” & 1/2” socket and crescent wrench are necessary to complete installation.