Owner Manual

15
Customer Service Tel. [phone] www.DeltaChildren.com
Mobile Assembly
A
Screws
B
1
2
4
3
• Fit the mobile to the mobile arm. Push the mobile up firmly.
HINT:
To disassemble the mobile for storage, press the tab on the
mobile arm and pull the mobile down.
•
Remove two (x2) pre-installed screws from mobile arm.
• Locate the pre-drilled holes on the bassinet frame and place the
mobile arm over the holes on the bassinet side frame.
• Re-insert the screws into the mobile arm. Tighten with screwdriver.
To Remove the Mobile Arm Assembly
• Please reverse from step two to step one.
NOTE: when placing or lifting a child into or out of the bassinet make
sure the canopy is fully rotated into the closed position and electronic
mobile arm is fully rotated away from the baby.