Paper Shredder User Manual

SAFETY

RC12 12-05 Safety Section 1-11

SAFETY

Be particularly careful when transporting the Implement with the Tractor. Turn curves or go

up hills only at a low speed and using a gradual steering angle. Rear mounted implements

move the center of gravity to the rear and remove weight from the front wheels. Make certain, by adding fron

ballast, that at least 20% of the tractor’s weight is on the front wheels to prevent rearing up, loss of steering

control or Tractor tip-over. Slow down on rough or uneven surfaces to prevent loss of steering control which

could result in property damage or possible injury. Do not transport unless 3-Point lift lever is fully raised and

in the latched transport position. Dropping implement in transport can cause serious damage to the tracto

and/or Implement and possibly cause the operator or others to be injured or killed. (S3PT-2)

Allow sufficient clearance for the Implement to swing outward while turning. Implements

carried behind the Tractor will swing outside the tire path when making turns. Contacting a

solid object while turning will cause equipment damage and possible injury.

(S3PT-20)

Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in

such a way as to be clearly visible and legible. When transporting the

Equipment use the Tractor flashing warning lights and follow all local traffic regulations.

(SG-