Paper Shredder User Manual

OPERATION

RC12 12/05 Operation Section 4-12

OPERATION

6.1 Leveling Deck

To Facilitate a safe and efficient mowing operation,

the mower should be operated parallel to the

ground at all times. Never operate if front or rear of

mower is tilted upward. Objects may be discharged

at high speeds causing possible injury or even

death.

Adjust Top Link to level mower roller adjustment.

Side Skid Shoes should always be parallel to

ground throughout the full adjustment range. Adjust

cutting height of machine by raising or lowering rear

roller as specified in Operation Section.

Driveline Length Check

Do not let the Blades turn when the Mower Deck is raised for any reason,

including clearance or for turning. Raising the Mower deck exposes the

Cutting Blades which creates a potentially serious hazard and could cause serious injury or

even death from objects thrown from the Blades.

(SRM-7)

7. DRIVELINE ATTACHMENT

The driveline yoke and tractor PTO shaft must be

dirt free and greased for attachment.

To connect the mower driveline to the tractor PTO

output shaft, pull the driveline yoke collar back and

align the grooves and splines of the yoke with those

of the PTO shaft. Push the driveline yoke onto the

PTO shaft, release the locking collar, and position

the yoke until the locking collar balls are seated

onto the PTO shaft. Push and pull the driveline

back and forth several times to ensure a secure

attachment.

After the driveline is securely attached, place the

tractor PTO master shield back in the operating

position. OPS-R-0003

en a

emen

npu

rac

PTO

mpor

connecting yoke spring activated locking collar slides freely and the locking balls are seated

securely in the groove on the Tractor PTO shaft. A driveline not attached correctly to the Tractor PTO shaft

could come loose and result in personal injury and damage to the Implement.

(S3PT-17)