User Manual

8
Installation
NOTE:
All Séura drawing packages indicate generalized nominal residential
wood framing construction, and are not indicative of any particular
building code. It is the installers responsibility that all electrical,
audio/visual, and framing construction are code compliant to the

made to Séura recommendations are at the sole discretion of the
installer and release Séura of all liability.
Inspect the desired location for installation and be aware of all
electrical wiring pathways, water pipes, gas lines, or other potentially
hazardous conditions that may exist to protect from accidental
damage during creation of on-site conditions.

approved.
Ensure all framing requirements, if needed have been completed to building code and pose no structural issues.
It is REQUIRED that this product is plugged into an electrical outlet protected by a Ground Fault Circuit Interrupter (GFCI) to protect


conditions.
Step 1
Install back box to framing members using
the provided four screws and washers
through screw-mounting slots in back box.



and other desired cords through pass-
through port.
Read all installation instructions before beginning
installation.
BACK BOX
VERTICAL FRAMING MEMBERS
SCREW
INTO
FRAMING
MEMBERS
USING

MOUNTING



PORT

VOLTAGE
POWER
AUDIO
VIDEO
Note: Do not overtighten mounting

snuggly between framing members.

occurs, the back box may deform,
resulting in a poorly sealed
installation. If the back box doesn’t

shim the framing members for a

Scan to watch the 2-minute installation video