Instructions

be removed.
 Do not allow the power cord to touch hot
surfaces.
 Do not let the power cord hang free.
 Always switch the appliance o and
remove the plug from the wall socket:
- a er use,
- in case of malfunction,
- before cleaning.
 When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
 Overheated oil or fat tends to ignite.
 erefore do not over ll the baking tray.
  is appliance operates at very high
temperatures.
Warning: the door as well as
the accessible surfaces of the
appliance become hot during
operation. Burns can occur from touching
these hot parts.
 Do not touch the accessible heating
elements.
 Do not leave the appliance unattended
while in use.
  e appliance is not intended to be
operated by means of an external timer or
separate remote-control system
 No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
  is appliance is intended for domestic or
similar applications, such as
- in shops, o ces and other similar
working environments,
- in agricultural areas,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
 In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by
quali ed personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
 e address can be found in the appendix
to this manual.
Before using for the  rst time
– Clean the appliance (see General care
and cleaning) and completely remove any
packing materials.
– Before using the appliance for the  rst
time, let it heat up for 15 minutes with both
heating elements (
) on (see Operation).
When the appliance is switched on for the
 rst time, a slight smell may be emitted.
 is is normal and will only last for a very
short time. Ensure su cient ventilation.
4-position switch
O
Upper heat
Lower heat
Upper and lower heat
Turn the 4-position switch to the desired
setting.
 e heating elements will only switch on a er
the timer is activated.
Timer
 e timer can be used for selecting a certain
cooking time (max 60 minutes).
To turn the unit o , turn the switch to position
0.
To pre-programme the cooking time, turn the
switch clockwise to the desired time.
To set a time of less than 10 minutes, turn the
timer to a somewhat higher setting  rst and
then slowly turn it back to the desired time
setting. A er the pre-programmed time has
elapsed, an acoustic signal indicates that the
heating elements are switched o .
Indicator lamp
 e indicator lamp lights up when the
appliance is switched on with the timer. It
goes out once the pre-programmed time has
elapsed, or if the switch is turned back to
position 0.
Interior compartment temperature
 e interior operating temperature is around
200 °C.
9