Instructions for use Refrigerator
Refrigerator Dear Customer, Before using the appliance, please read the following instructions carefully and keep this manual for future reference. The appliance must only be used by persons familiar with these instructions. Connection to the mains supply The appliance should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating label.
Warning: Do not damage the cooling circuit. Any escaping refrigerant causes damage to the eyes; there is also a danger of the gas igniting. Warning: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Sufficient ventilation must be ensured at all times. Warning: Do not use any external device (e.g.; heaters or heating fans) to accelerate de-frosting. Warning: Do not operate any electrical appliances (e.g.
Familiarisation 1. 2. 3. 4. 5. 6. Cold storage compartment General and bottle storage Adjustable foot Removable storage rack Drip tray Temperature control (on the rear) The upper section of the unit contains a coldstorage compartment that can be closed by a door. Before using for the first time – Remove any exterior and interior packaging materials completely, including the adhesive strips.
1. Remove the hinge cover (1). 2. Use a suitable pointed tool to remove the cover (5). 3. Use a suitable screw-driver to remove the two screws (2) holding the upper hinge (3) to the housing. 4. Carefully lift up the door and place it on a soft surface to protect it from scratches. 5. Remove the blind covers for the hinge mounting holes (9) and fit it in the corresponding place on the right. Ensure that the cover is firmly pushed down into the hole. 6.
Main cabinet – Different areas of the refrigerator cabinet are affected differently by the cooling effect. The warmest area is around the door in the higher part of the cabinet, the coldest around the rear wall and in the lower part of the cabinet. – The food should therefore be stored as follows: – On main cabinet shelves (from top to bottom): bakery items, ready meals, dairy products, meat, fish and cold meats/sausages.
persists, disconnect the appliance from the mains power and contact our Customer Service Department. Problem Possible cause and solution – – The appliance is not working – – at all. There is a power failure The main fuse has blown. The temperature control is set to ‘1‘. The fuse in the wall socket (if applicable) has blown. This can be checked by connecting another electrical device to the socket and checking for function. – – Check for proper positioning (uneven floor?).
Information needed by the Customer Service Department Should repairs to the appliance become necessary, please contact our Customer Service Department, providing a detailed fault description and quoting the model number KS ... on the rating plate of the appliance (see picture). This information will help us to handle your request efficiently. In case of any malfunction or other problem, please contact our Customer Services Department. The address can be found in the appendix to this manual.
Product data sheet Art. no.
Kundendienstzentralen Service Centres Centrales service-après-vente Oficinas centrales del servicio Centros de serviço Centrale del servizio clienti Service-centrales Centrale serviceafdelinger Centrala kundtjänstplatser Keskushuollot Servisné stredisko Centrala obsługi klientów Szerviz Κεντρικό σέρβις SEVERIN Service Am Brühl 27 59846 Sundern Telefon (02933) 982-460 Telefax (02933) 982-480 service@severin.de Kundendienst Ausland Belgique Dancal N.V. Bavikhoofsestraat 72 8520 Kuurne Tel.
I/M No.:8545.
