Product data

Refrigerator
Dear Customer,
Before using the appliance, please read the following instructions carefully and keep this manual for
future reference. The appliance must only be used by persons familiar with these instructions.
Connection to the mains supply
The appliance should only be connected to an earthed socket installed in accordance with the
regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating
label. This product complies with all binding CE labelling directives.
Do not operate this unit by means of a transformer.
To prevent noise vibration, ensure that the power cord does not touch any part of the rear of the
unit
General information
This appliance is a compressor refrigerator, designed for short-term storage of food.
The unit is classified as Climate Class ‘N’ (normal).
This appliance is intended for domestic or similar applications, such as in
- shops, offices and other similar working environments,
- agricultural areas,
- hotels, motels etc. and similar establishments,
- bed and breakfast type environments.
This appliance is not intended for commercial use, nor for use in the catering business or similar
wholesale environments.
No responsibility is accepted if damage results from improper use, or if these instructions are not
complied with.
Important safety instructions
To prevent the risk of personal injury or damage to the unit, it must only be transported while in
its original packaging.
This appliance is not intended for use by any persons (including children) with reduced physical,
sensory or mental capabilities, or lacking experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not play with the appliance.
Caution: Keep any packaging materials well away from children: there is a risk of suffocation.
The cooling circuit in this appliance contains the refrigerant isobutane
(R600a), a natural gas with a high level of environmental compatibility,
which is nevertheless flammable. Ensure, therefore, that none of the
components of the refrigerant circuit become damaged during
transportation and installation of the appliance. If damage to the cooling
circuit does occur, do not switch on or connect the appliance to the mains
power. In the case that there is an open fire or any other sources of ignition in the vicinity of the
refrigerant gas, make sure it is removed immediately from this area and that the room is then
thoroughly ventilated.
10