User Manual

ASSEMBLY INSTRUCTIONS
Top
Top
Fig.1
Fig.2
Fig.3
Fig.4
1. Screw the leveling feet (A) into the bottom of
each pole (C), as shown in Figure 1.
2. Fasten a pair of slip sleeves (B) around the
groove of each pole, at the desired height for
the basket. If necessary, move the sleeves
slightly up or down until it snaps into position,
as shown in Figure 2.
3. Slide the shelf (D) over the poles (C) and push
down, as shown in Figure 3.
4. Fasten slip sleeves (B) around the grooves at
the desired height and slide shelf (D) over
the poles. Repeat step for the other shelf,
as shown in Figure 4. Make certain all shelves
are level by adjusting the slip sleeves and/or
adjusting the leveling feet.
A
B
C
D
B
C
D
D
Top
Top
B
B
D