Use and Care Manual

Please make sure you have all parts before assembling.
2 pcs
2 pcs 16 pcs
2 pcs
Lower Frame
Top Frame Cross Bar
Support Bar
32 pcs 4 pcs
4 pcs 2 pc
Screw
Long Screw
Wheel Insert
Wheel
2 pc
Locking Wheel
Tools Needed:
Phillips screwdriver.
Step 1:
A B C D
E F G H
I
Step 2:
Step 3:
Place Top Frame from Step 1 onto Lower
Note: Make sure both Locking Wheels (I)
are on either the front or back side.
With Phillips screwdriver, attach Cross Bar
With Phillips screwdriver, attach Cross Bar
With Phillips screwdriver, attach Support
(C) to the Top Frame (B) using Screws (E).
Bar (D) to the Top Frame (B) using Screws
(F).
With Phillips screwdriver, attach Support Bar
Insert Wheel Insert (G) at each end of Lower
(C) to the Lower Frame (A) using Screws (E).
(D) to the Lower Frame (A) using Screws (F).
Frame (A).
Attach Wheels (H & I) to Lower Frame (A).
Frame from Step 2.