Instruction manual

Caution:
Turn power switch to "O" before
inserting or removing the needle.
Replace the needle at the first sign of
thread breakage or skipped stitches.
Select the correct type and size of
needle for the fabric to be sewn. Turn
the balance wheel towards you until
the needle is at highest position.
Loosen the needle clamp screw (A)
and tighten again after inserting the
new needle. (1)
The flat side of the needle shaft
should be facing away from you (B).
Push the needle up (C) into the
needle clamp as far as it will go (D).
Tighten the needle clamp screw firmly.
The sewing needle must always be
straight and sharp for smooth sewing.
Replace the needle (2) if it is bent (A),
blunt (B) or the point is damaged (C).
GB
Changing the needle (System 130/705H)
A
B
C
D
22
1
2
AB
C