Instruction manual

52
Left and right side balance for buttonhole
GB
Stitch density on right and left
sides of buttonhole can be
adjusted by buttonhole balance
control dial.
This dial should usually be in a
neutral position. (between "+"
and "")
If the stitches on the left side of
the buttonhole are too close
together, turn the dial to the left
(+).
* Turning dial to the left opens
left side.
If the stitches on the left side of
the buttonhole are too open,
turn the dial to the right ().
* Turning dial to the right closes
left side.
The stitch on the right side of
the buttonhole is set using the
stitch length dial.