Instruction manual

Twin needle

- Turn stitch length dial to the desired stitch length.

- Turn stitch selector to straight stitch, center needle position,

width setting "0".

- Make sure that the two threads used to thread the twin needle

are of the same weight. You can use one or two colors.

- Insert the twin needle in the same way as single needle. Flat

side of needle should face away from you.

- Follow instructions for single needle threading. Thread each

needle separately.

Please note:

When sewing with twin needle, always proceed slowly, and make

sure to maintain a low speed to insure quality stitching.

When using twin needle on zig-zag make sure the stitch width dial

is set between "0" and "2.5". Do not use twin needle at setting

above "2.5".

1~4

0~2.5