Instruction manual

Caution:

Always make sure that the machine is unplugged

from power source and the main switch is on "O"

before inserting or removing any parts and before

cleaning.

Remove the stitch plate:

Cleaning the feed dog:

Cleaning and lubricating the hook:

Important:

Turn the handwheel until the needle is fully raised.

Open the hinged front cover and unscrew the needle

plate screw with the screw driver. (1)

Remove the bobbin case and use the brush supplied

to clean the whole area. (2)

Remove the bobbin case. Snap the two hook

retaining arms (a) outwards. Remove the hook race

cover (b) and the hook (c) and clean with a soft cloth.

Lubricate at the points (d) (1-2 drops) with sewing

machine oil. Turn the handwheel until the hook race

(e) is in the left position. Replace the hook (c).

Replace the hook race cover and snap back the two

hook retaining arms. Insert he bobbin case and

bobbin and replace the stitch plate.

Fabric fluff and threads must be removed

regularly. Your machine should be serviced at regular

intervals at one of our service agencies.

Maintenance