Owner's Guide

6
TOLL FREE: 1-800-798-7398
Using Your Professional Steam & Spray
™
Mop - cont’d
Frequently Asked Questions
Q. My Professional Steam & Spray
™
Mop leaves a
foam on hard floors.
A. The Professional Steam & Spray
™
Mop
Cleaning Pad is likely too saturated. Replace it
with a clean, dry pad.
Q. My floors appear cloudy after cleaning.
A. The Professional Steam & Spray
™
Mop
Cleaning Pad may be dirty. Change the pad.
OR
A. The Professional Steam & Spray
™
Mop
Washable Cleaning Pad was washed with
a powder detergent and may be damaged
and require replacement. Never use powder
detergents. Only use liquid detergent to
launder the cleaning pads.
OR
A. The Professional Steam & Spray
™
Mop may
have been left in the same spot for too long
with a wet cleaning pad. Never leave the unit
with a wet pad in one spot for too long.
OR
A. This may be leftover from past cleaners
that were used on the floor surface. Use the
Professional Steam & Spray
™
Mop a few
more times and see if the leftover cloudiness
is removed. If this does not work, we suggest
rinsing the floor with water and letting it dry.
One or more rinses generally removes the
residue. A more stubborn case may require
you to rinse the floor with a mix of one
part vinegar to 2 parts water. Then use the
Professional Steam & Spray
™
Mop again with
a clean pad.
General Tips:
• Change the Cleaning Pad frequently for best
results.
• Always vacuum floors before cleaning.