Owner's Guide
3
www.sharkclean.com
IMPORTANT: Always make sure that
the Professional Steam & Spray
™
Mop is
UNPLUGGED from the wall when not in use.
Never change or remove the cleaning pad when
the appliance is plugged into the wall. Use
ONLY Steam Energized
™
Cleanser. The addition
of other chemicals or cleaning solutions may
damage the appliance, void the warranty and
could be unsafe for you and your family.
fig. 1
fig. 3
fig. 5
Cleaning Pad
fig. 4
fig. 2
ASSEMBLY
1 Insert the handle into the neck of the main body
of the Professional Steam & Spray
™
Mop. Push
the mop handle and main body of the appliance
together until you hear it “click” into place.
(Fig. 1)
2 Insert the power cord plug into the power cord
receptacle on the unit. (Fig. 2)
3 Hold the power cord and wrap it around the cord
holders. (Fig. 3)
4 Remove the battery cover and insert the 4 AA
batteries. (Fig. 4) Replace the battery cover.
5 Place the Professional Steam & Spray
™
Mop unit
on top of the cleaning pad. (Fig. 5)
If using the washable cleaning pad, ensure that
the Velcro
®
side is facing up and the tab is in
the back. If using the Sanifiber
™
disposable pad,
ensure that the logo side is facing up.